Top » Catalog » Norton » Norton-All »


D12/2 Norton Cylinder Barrel Studs Dominator Stainless d01

D12/2 Norton Cylinder Barrel Studs Dominator Stainless d01
These are a set of 9 Norton Dominator Cylinder Barrel Studs, Nuts and Lock Washers in Stainless Steel. The cycle studs and nuts have the correct 60 degree thread angle; and the correct spanner size across the flats, 9 rectangular section stainless lock washers are included. All studs have a slight radius on the end the same as original. These will fit the 500, 600 and 650cc motors.

There is some confusion in the Norton parts books as to the parts numbers for these but some of the numbers are D12/2L, D12/2S, D12/3L and D12/3S The studs have slightly domed ends which can easily be polished to look great as they slightly protrude through the nuts. The nuts have a single sided chamfer and are machined back and front to leave a nicely machined finish, each hexagon side of the nuts have been hand finished to leave a bright surface rather than the dull finish normally found on hex bar. All nuts are semi polished so they can easily be polished to a mirror finish or bead blasted to give that original cadmium look.

Please note all stainless parts MUST be assembled with copa slip (copper slip), which is also available on this site.

All British thread data can be viewed on our web site. Any queries please phone Motalia on +44 (0)1953 789420.

These items are Made in England.

6xI25, 1xI21, 2xI19

Delivery to Portugal, Greece, Turkey and Spain is unreliable and cannot be guaranteed, if you order from these countries you do so at your own risk. It is not uncommon for delivery to take 30 days or more.
Quick Find
Use keywords to find the product you are looking for.
Advanced Search
1 x AJS 3GL Head Bolts Stainless
1 x 3GL Matchless rocker box bolts
1 x G80 Matchless rocker box bolts G80-r-box
1 x 001) AJS Model 31 Stainless 5/16 Cylinder/Hd Studs/Nuts - 001AJ-
1 x 001)... Engine Plate Studs Stainless triton-eng
1 x 006) BSA Bantam Stainless Cylinder Head Studs - 001BB-W1-34x4
1 x 005 BSA A10 A7 A-Series Stainless Cyl Barrel Studs 005BA W1-23x9
1 x 002) BSA A Series Sump Plate Stainless Studs etc - 002BA I12
1 x 16) 67-6039-set 67-6038 2-452 BSA Stainless Rear Drum Bolt
2 x 200) BSA 650cm Models 1971 Workshop Manual - BSA650
1 x 011) BSA B Series Gearbox Studs Stainless - 006BB-R28x1 R50x1
1 x 009) BSA Goldstar - all B Ser Stainless Rocker Box Studs - 004BB
1 x 012) BSA Stainless Steel Handle Bar Clamp Bolts - 007BB-U48x4
1 x 106) Triumph 350/500 Unit Parts Manual No6 1964 - TP06
1 x 116) Triumph 6T, TR6, T120 Pre Unit Parts Manual 1960 - TP16
1 x Laverda 500/350 Workshop Manual - 94000048
1 x Laverda 3C Post 76 Parts Manual - P1000-76
1 x Laverda 750 SF1-2 Workshop Manual - 94000021
1 x Laverda 750 SF1-2 Parts Manual - P750
1 x Laverda 1200 Parts Manual - P1200
1 x Laverda 3C Pre 76 Parts Manual - P1000
1 x 101) Triumph 6T, TR6, T120 Unit Parts Manual No1 1963 - TP01
1 x Laverda Parts Manual RGS - PRGS
2 x 202) BSA Goldstar 500 Parts Catalogue - BSA500
1 x Laverda 1000-1200 Workshop Manual - 94000066
1 x 104) Triumph 350/500 Unit Parts Manual No4 1960 - TP04
1 x 103) Triumph T120 6T TR6 Unit Parts Manual No3 1964 - TP03
1 x Laverda Parts Manual Variants 120s - VAR120
1 x Laverda 500/350 Parts Manual - P500
1 x Laverda 180 Additions Manual - VAR180
1 x 115) Triumph 650 Pre Unit Parts Manual 1958 No15 - TP15
2 x 201) BSA B25 Starfire Parts Catalogue - BSAB25
1 x E8181 Triumph Cycle Stainless Bolt HC14114 - K1-36
1 x E8108 Triumph Cycle Stainless Lock Nut NCL14026 - Q02
1 x 001a) 1/2" x 1-3/4" UNF Stainless Stud S1800 T23
1 x E3108 70-3108 Triumph Stainless Stud STCC3807916 - J53
1 x E2312 70-2312 Triumph Stainless Shakeproof Washer SP014 - Q03
1 x Benelli Tornado Quick Fastener 5mm R95050141A
1 x Benelli Tornado Quick Fastener 6mm R95050012A
1 x Benelli Tornado Tank Square Logo BTSQ
1 x Benelli Tornado Core Plug Stainless R14043131A
1 x Benelli Tornado O-Ring R18243091A
1 x Benelli Tornado Oil Filter R180107101000
1 x Benelli Tornado Special Washer R310032007000
1 x Benelli Tornado Special Altnator Washer R310032008000
1 x Benelli Tornado Tank Lead Free Logo BT2
1 x Benelli Tornado Clutch Cover Gasket R11013681A
1 x Benelli Tornado Gearbox Sprocket R75013071A
1 x Benelli Tornado Alternator Drive Rubbers R19113191A
1 x Benelli Tornado Rear Chain R180127001000
1 x Benelli Tornado Tank Round Logo BT1
1 x Benelli Tornado Nut R19143251A
1 x Benelli Tornado Clutch Basket R3108000887000
1 x Benelli Tornado Rear Sprocket R21813671A
1 x AAA This section is being worked on
1 x Benelli Tornado Spring R300018005000
1 x Benelli Tornado Z25 Gear Bolt R90752751C
1 x Velocette Overhead Camshaft Parts 1925-1931 - V1000
1 x 0310a Velocette KSS Stainless Crankcase Studs V100 - H35
1 x 0325 Velocett Timing Cover/Tappet Screws (14) Stainles V0064
1 x 0201 Velocette Handle Bar Bolts Stainless Steel - V0017-K1-20x4
1 x 0102 Velocette Venom Stainless Centre Stand Stud+Nuts+Wash V0109
1 x 0382 Velocette Stainless Crankcase Adapters set of 4 V0069/7
1 x 0384 Velo Ven/Viper/Thrux Stainless Cylinder Studs V0068
1 x 0110 Velocette Fork Pinch Bolts Nuts+Wash x 2 Stainless V0011
1 x 04-01 Velocette Kick Start Pivot Bolt V0090
1 x 0390 Velo Venom Viper Stainless Carb Studs etc - V0058 K3-16
1 x 0106 Velocette Brake Pivot Nuts+Wash x 2 Stainless V0009
1 x 0392 Velocett Venom Viper Rocker Box Bolts Stainless V0115
1 x 0104 Velocette Brake Cam Nuts+Wash x 2 Stainless V0008
1 x 0101 Velo MAC Stainless Engine Plate Studs - V1001-J51x4 J62x3
1 x 0110 Velocette front Mudguard Bolts Nuts+Washers Stainless V0020
1 x 0310 Velocette Ven/Viper/MSS Stainless Crankcase Studs V0072
1 x 0320 Velocett Mag Studs + Nuts + Wash Stainless V0071
1 x 0301 Velocette Venom Stainless Steel Engine Plate Studs V0052
1 x 0302 Velocette Engine Plate Lower Bolt V0053 U71
1 x 13a) BSA rear brake drum nut Stainless 2-452
1 x 13) 67-6038 BSA Stainless Rear Brake Drum Bolt H48
1 x 003) BSA A10 A7 A-Series Crank Case Studs, Stainless - 003BA
1 x 008) BSA Goldstar B Series Stainless Carb Studs etc 003BB I17
1 x 15) 67-6038-set BSA Stainless Rear Brake Drum Bolts + Nuts H47-H
1 x 004) BSA A10 A7 A-Series Engine Plate Studs, Stainless - 004BA
1 x 010) BSA Gold Star Stainless Steel Engine + G/Box Studs - 005BB
1 x 007) BSA Gold Star Stainless Steel Engine Plate Studs - 002BB
1 x 001) BSA A Series Magneto Stainless Studs etc - 001BA W1-11x3
1 x 14) 67-6039 BSA Stainless Rear Brake Drum Lock Tabs H42 x3
1 x 3/8 UNF x 1-1/2" Stainless Socket Cap M/C Head SUF38112 - W3-21
Back to Motalia's Main Site